debugging

firmware/cup.c

@@ -16,6 +16,7 @@
 const uint16_t LED_GREEN_TEMP = 300;
 const uint16_t LED_RED_TEMP = 1200;
 
+const uint16_t TARGET_TEMP_MIN = 300;
 const uint16_t TARGET_TEMP_MAX = 1520;
 
 uint8_t led_color = 0;
@@ -73,7 +74,7 @@ ISR(PCINT0_vect)
 	uint8_t diff = new_state ^ input_state;
 	if(!diff) {return;}
 	
-	if(diff & (1 << TAST_PIN) && new_state & (1 << TAST_PIN))
+	if(diff & (1 << (TAST_PIN - 1)) && new_state & (1 << (TAST_PIN - 1)))
 	{
 		dev_state = !dev_state;
 	}
@@ -81,7 +82,9 @@ ISR(PCINT0_vect)
 	int8_t change = state_change[((input_state & 3) << 2) | (new_state & 3)];
 	if(change)
 	{
-		target += change;
+		target += change << 7;
+		if(target < TARGET_TEMP_MIN) {target = TARGET_TEMP_MIN;}
+		else if(target > TARGET_TEMP_MAX) {target = TARGET_TEMP_MAX;}
 		setting_timeout = TIMEOUT;
 	}
 	
@@ -152,15 +155,15 @@ inline void io_init(void)
 
 inline void led_init(void)
 {
-	TCCR0A = (1 << COM0A1) | (1 << COM0B1) | (1 << COM0B0) | (1 << WGM01) | (1 << WGM00);/* pwm enable: fast, A not inverted, B inverted */
-	TCCR0B = (1 << CS00);/* prescaler / 1024 */
+	TCCR0A = (1 << COM0A1) | (1 << COM0B1) | (1 << COM0A0) | (1 << WGM01) | (1 << WGM00);/* pwm enable: fast, A inverted, B not */
+	TCCR0B = (1 << CS00);/* no prescaler */
 	OCR0A = OCR0B = led_color;
 }
 
 inline void led_set(uint16_t value)
 {
 	if (LED_GREEN_TEMP < value && value < LED_RED_TEMP) {
-		value = (value-LED_GREEN_TEMP) * 255/(LED_RED_TEMP-LED_GREEN_TEMP);
+		value = ((uint32_t) (value-LED_GREEN_TEMP) * 255)/(LED_RED_TEMP-LED_GREEN_TEMP);
 	} else if (value < LED_GREEN_TEMP) {
 		value = 0;
 	} else {
@@ -186,7 +189,8 @@ inline void adc_init(void)
 
 inline void heat_init(void)
 {
-	TCCR1B = (1 << WGM12) | (1 << CS10);/* some mode allowing to set timer TOP, no prescaler */
+	TCCR1A = (1 << WGM11) | (1 << WGM10);
+	TCCR1B = (1 << WGM13) | (1 << WGM12) | (1 << CS10);/* some mode allowing to set timer TOP, no prescaler */
 	TIMSK1 = (1 << TOIE1);/* interupt on overflow */
 	OCR1A = 39063;
 	
@@ -229,24 +233,24 @@ int main(void)
 				temperature = linearize_temp(adc_sum);
 				adc_sum = 0;
 				adc_pos = 0;
-				if(dev_state)
+				if(1)//dev_state)
 				{
 					heat_output = control_output();
 					if(startup && heat_output > 192) {heat_output = 192;}
 					heat_on[0] = 0;
 					heat_on[1] = 128;
-					heat_off[0] = heat_output;
-					heat_off[1] = heat_output + 128;
+					heat_off[0] = 255;//heat_output;
+					heat_off[1] = 128;//heat_output + 128;
 				}
-				else
+				/*else
 				{
 					heat_on[0] = heat_on[1] = heat_off[0] = heat_off[1] = 0;
-				}
+				}*/
 			}
 		}
 		
-		if(!dev_state) {led_off();}
-		else if(setting_timeout) {led_set(target);}
+		/*if(!dev_state) {led_off();}
+		else*/ if(setting_timeout) {led_set(target);}
 		else {led_set(temperature);}
 		
 		if(eeprom_write && dev_state)