enabled heat control

firmware/cup.c

@@ -36,7 +36,9 @@ uint8_t heat_off[2] = {128, 0};
 uint8_t input_state = 0;
 uint8_t dev_state = 0;
 
-uint8_t startup = 1;
+#define TEN_SECONDS 256
+uint16_t startup = TEN_SECONDS;
+
 uint8_t eeprom_write = 0;
 #define ONE_MINUTE 1536
 uint16_t eeprom_clk = ONE_MINUTE;
@@ -50,10 +52,10 @@ ISR(TIM1_OVF_vect)
 {
 	/* timeout for displaying target temperature */
 	if(setting_timeout) {setting_timeout--;}
+	if(startup) {startup--;}
 	if(eeprom_clk) {eeprom_clk--;}
 	else
 	{
-		startup = 0;
 		eeprom_write = 1;
 		eeprom_clk = ONE_MINUTE;
 	}
@@ -91,11 +93,18 @@ ISR(PCINT0_vect)
 
 inline uint8_t control_output(void)
 {
-	if (temperature > target)
+	if(temperature > target)
 	{
 		return 0;
-	} else {
+	}
-		return (uint8_t)((uint16_t)((uint32_t)((uint32_t)255*target)/temperature)/TARGET_TEMP_MAX);
+	else if(temperature + 100 > target)
+	{
+		return (target - temperature) * 255 / 100;
+	}
+	else
+	{
+		return 255;
+		//return (uint8_t)((uint16_t)((uint32_t)((uint32_t)255*target)/temperature)/TARGET_TEMP_MAX);
 	}
 }
 
@@ -187,8 +196,7 @@ inline void led_off(void)
 inline void adc_init(void)
 {
 	ADMUX = (1 << REFS1) | (TEMP_PIN << MUX0);/* Vref = 1.1, pin selection */
-	ADCSRA = (1 << ADEN) | (1 << ADATE);/* adc enable, triggered */
+	ADCSRA = (1 << ADEN) | (1 << ADSC) | (1 << ADATE) | (1 << ADPS2);/* adc enable, free running mode, prescaler 16 */
-	ADCSRB = (1 << ADTS2);/* trigger on counter 0 overflow */
 	DIDR0 = (1 << TEMP_PIN);/* disable digital input on adc pin */
 	/* result in (ADCH << 8) | ADCL, accessable as ADC */
 }
@@ -234,19 +242,19 @@ int main(void)
 			adc_sum += ADC;
 			if(++adc_pos == 64)
 			{
-				adc_sum = 47000;
+				//adc_sum = 47000;
 				temperature = linearize_temp(adc_sum);
-				temperature = 1100;
+				//temperature = 1100;
 				adc_sum = 0;
 				adc_pos = 0;
 				if(1)//dev_state)
 				{
 					heat_output = control_output();
-					if(startup && heat_output > 192) {heat_output = 192;}
+					if(startup && heat_output > 96) {heat_output = 96;}
 					heat_on[0] = 0;
 					heat_on[1] = 128;
-					heat_off[0] = 128;//heat_output;
+					heat_off[0] = heat_output;
-					heat_off[1] = 0;//heat_output + 128;
+					heat_off[1] = heat_output + 128;
 				}
 				/*else
 				{