found bugs, still debugging

gg.c

@@ -86,15 +86,22 @@ int main(void)
 //    while(debug){
     	debug=mmc_init();
 //    }
-//    debug = 2;
+    debug = 2-debug;
 	
-	mmc_read_part(0, (unsigned char *) &length, 4);
+    debug = mmc_read_part(0, (unsigned char *) &length, 4);
+    debug = 1;
+    if(length==0){
+        debug = 2;
+    }
+    debug = ((length>>0)&0x3) + 1;
+
+    debug += 1;
 	
 	timer_init_tiny26();
 	sei();
 	
-/*    
+    
-	unsigned long block = 0;
+/*	unsigned long block = 0;
 	for(;; block++)
 	{
 		mmc_read_to_ringbuffer(block, &rb);
@@ -102,8 +109,8 @@ int main(void)
 //    debug = 0;
 
     uint8_t i,r;
-    uint16_t a;
+    uint16_t a,to;
-    for(;;){
+    for(to=0; to<16000; to++){
         i += debug*8;
         a = i<<8;
         r=1;

mmc.c

@@ -33,6 +33,7 @@ unsigned char mmc_init ()
 //############################################################################
 {
 	unsigned int Timeout = 0;
+    uint8_t debug;
 	
 	//Konfiguration des Ports an der die MMC/SD-Karte angeschlossen wurde
 	MMC_Direction_REG &=~(1<<SPI_DI);			//Setzen von Pin MMC_DI auf Input
@@ -61,7 +62,7 @@ unsigned char mmc_init ()
 	
 	//Sendet Commando CMD0 an MMC/SD-Karte
 	unsigned char CMD[] = {0x40,0x00,0x00,0x00,0x00,0x95};
-	while(mmc_write_command (CMD) !=1)
+	while(mmc_write_command (CMD) != 1)
 	{
 		if (Timeout++ > 200)
 			{
@@ -69,6 +70,7 @@ unsigned char mmc_init ()
 			return(1); //Abbruch bei Commando1 (Return Code1)
 			}
 	}
+//    return(((debug >>1) & 1)+1); //FIXME
 	//Sendet Commando CMD1 an MMC/SD-Karte
 	Timeout = 0;
 	CMD[0] = 0x41;//Commando 1
@@ -151,6 +153,7 @@ unsigned char mmc_read_byte (void)
 #else			//Routine für Software SPI
 	for(unsigned char a=8; a>0; a--) //das Byte wird Bitweise nacheinander Empangen MSB First
 	{
+		Byte <<= 1;
 		MMC_Write &=~(1<<SPI_Clock); //erzeugt ein Clock Impuls (Low)
 		WAIT_HALF_CLOCK;
 		
@@ -158,7 +161,6 @@ unsigned char mmc_read_byte (void)
 		{
 			Byte |= 1;
 		}
-		Byte <<= 1;
 		MMC_Write |=(1<<SPI_Clock); //setzt Clock Impuls wieder auf (High)
 		WAIT_HALF_CLOCK;
 	}
@@ -310,13 +312,13 @@ unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
 
 //############################################################################
 //Routine zum lesen des CID Registers von der MMC/SD-Karte (16Bytes)
-void mmc_read_block_part(unsigned char *cmd,unsigned char *Buffer,uint16_t count, unsigned int Bytes)
+uint8_t mmc_read_block_part(unsigned char *cmd,unsigned char *Buffer,uint16_t count, unsigned int Bytes)
 //############################################################################
 {
 	//Sendet Commando cmd an MMC/SD-Karte
 	if (mmc_write_command (cmd) != 0)
 	{
-		return;
+		return(1);
 	}
 
 	//Wartet auf Start Byte von der MMC/SD-Karte (FEh/Start Byte)
@@ -326,7 +328,7 @@ void mmc_read_block_part(unsigned char *cmd,unsigned char *Buffer,uint16_t count
 	//Lesen des Bolcks (normal 512Bytes) von MMC/SD-Karte
 	for (unsigned int a=0;a<Bytes;a++)
 	{
-		if(Bytes < count) {*Buffer++ = mmc_read_byte();}
+		if(a < count) {*Buffer++ = mmc_read_byte();}
 		else {mmc_read_byte();}
 	}
 	//CRC-Byte auslesen
@@ -336,12 +338,12 @@ void mmc_read_block_part(unsigned char *cmd,unsigned char *Buffer,uint16_t count
 	//set MMC_Chip_Select to high (MMC/SD-Karte Inaktiv)
 	MMC_Disable();
 	
-	return;
+	return(0);
 }
 
 //############################################################################
 //Routine zum lesen eines Blocks(512Byte) von der MMC/SD-Karte
-void mmc_read_part(unsigned long addr,unsigned char *Buffer, uint16_t count)
+uint8_t mmc_read_part(unsigned long addr,unsigned char *Buffer, uint16_t count)
 //############################################################################
 {
 	//Commando 16 zum lesen eines Blocks von der MMC/SD - Karte
@@ -357,7 +359,7 @@ void mmc_read_part(unsigned long addr,unsigned char *Buffer, uint16_t count)
 	cmd[2] = ((addr & 0x00FF0000) >>16 );
 	cmd[3] = ((addr & 0x0000FF00) >>8 );
 
-    mmc_read_block_part(cmd, Buffer, count, 512);
+    return mmc_read_block_part(cmd, Buffer, count, 512);
 }
 
 //############################################################################

mmc.h

@@ -14,7 +14,7 @@ Copyright (C) 2004 Ulrich Radig
 
 //#define SPI_Mode			1		//1 = Hardware SPI | 0 = Software SPI
 #define SPI_Mode			0
-#define WAIT_HALF_CLOCK _delay_us(50)
+#define WAIT_HALF_CLOCK _delay_us(18)
 
 #define MMC_Write			PORTA	//Port an der die MMC/SD-Karte angeschlossen ist also des SPI
 #define MMC_Read			PINA
@@ -64,9 +64,9 @@ extern unsigned char mmc_init(void);
 
 extern unsigned char mmc_read_sector (unsigned long,unsigned char *);
 
-extern void mmc_read_block_part(unsigned char *, unsigned char *, uint16_t, unsigned int);
+extern uint8_t mmc_read_block_part(unsigned char *, unsigned char *, uint16_t, unsigned int);
 
-extern void mmc_read_part(unsigned long, unsigned char *, uint16_t);
+extern uint8_t mmc_read_part(unsigned long, unsigned char *, uint16_t);
 
 extern void mmc_read_block_to_ringbuffer(unsigned char *, ringbuf_t *, unsigned int);